These dimensions are for standard Locost suspension using Ford Sierra alloys fitted with 195/60 R14 tyres

600	Wheel diameter

115	distance from top balljoint to centre line of tyre
114	distance from top balljoint to centre line of axle
95	distance from bottom balljoint to centre line of tyre
110	distance from bottom balljoint to centre line of axle

88	x coordinate of top chassis pivot relative to bottom pivot
188	y coordinate of top chassis pivot relative to bottom pivot

345	distance from bottom balljoint to lower chassis pivot

0	initial camber(degrees)- used to calculate length of top link
0	initial droop(degrees) - used to calculate length of top link

These dimensions are for calculating driveshaft length for IRS

20	x coord of diff joint or rack inner joint relative to bottom pivot
36	y coord of diff joint or rack inner joint relative to bottom pivot

83	distance from centre of tyre to centre of driveshaft joint or track rod end


This is the range of the suspension travel for the animation

-5	top of suspension travel (degrees)
5	Bottom of suspension travel (degrees)

These are just scaling factors
.5	scale to fit display
200	movement speed - smaller numbers=slower